Process-Heating Magazine
  Home
  Subscribe
  Process Cooling
  Online
  Industry Headlines
  Web Exclusives
  Buyers Guide
  Career Search
  Current Issue
  Features
  Columns
  Products
  Calendar
  Resources
  Archives
  Equipment Overview
  Digital Editions
  Classifieds
  eNewsletter
  eNews Archives
  Market Research
  Special Collections
  PH Info
Search in: EditorialProductsCompanies
Products

Bottom-Flow Conveyor Oven

Gas-fired oven was manufactured to preheat tubes ranging from 6 to 46' at 350°F (177°C) for the oil industry. 


Compact Power Analyzer

Series EM26-96 provides both electrical-parameters analysis and control with harmonics included. 


Compact Pressure Transmitters

As an alternative to network process transmitters when a digital protocol is not required, Models GC51 and GC52 offer an ultra-compact NEMA 4X/IP65 enclosure measuring 2.65" in diameter. 


Drum Heater

Sahara Hot Can heats one 55-gal drum. Features include steel construction, thermostatic temperature control, wrap-around heating, casters to ease moving and placement, and a plug-in electrical cord. 


Heat Gun Alternative

The bench-top Glo-Ring is suitable for heat shrinking, plastic tube bending, soldering, adhesive curing, solder pre-forms and butt welding.


Low-Expansion Epoxy

Duralco 4463 resists electricity, chemicals and moisture and has good dimensional stability.


Milling Flash Dryer

When a discrete and fine end-product is desired, processors can dry powders, slurries, and filter and centrifuge cakes with a small-footprint milling flash dryer. 


Mini-Diaphragm Seals

Mini-seals can be used to isolate instrumentation from process media when high sensitivity is not required or space is limited.


Protective Coating

Corr-Paint CP2050 is used to protect steel components and structures in chemical processing and power generation plants for applications to 400°F (204°C).


Rubber Heating Tapes

With an adjustable thermostat control up to 425°F (218°C), HTWAT Series is designed for process temperature control, freeze protection and supplemental heat.


Safety Case Gauge

With a solid front and blow-out back, the safety case gauge offers 0.5 percent ANSI/ASME Grade 1A accuracy, full rotary movement and a micrometer pointer for calibration. 


Silicone Hoses

Platinum-cured silicone hoses are offered in seamless, flexible, convoluted or smoothbore designs that include an additional extruded silicone layer over the hose. 


Slurry Knife-Gate Valve

Series DX is designed for heavy slurry applications in the power and mining industries.


Temperature Transmitter

Series TTE is suitable for hazardous temperature measurement and has seven pre-programmed temperature ranges that are selectable via an internal dipswitch. 


Thermal Fluid System

The 10 million BTU/hr heater with circulating pump and 700-gal expansion tank can be mounted on a common skid with interconnecting piping, valves and strainer for a complete package.


Thermal Imaging Camera

Model HSI1200 provides users with a real-time thermal image for quick fault detection combined with a center spot, noncontact temperature measurement function.


Thermoelectric Recirculating Heater/Chiller

Pelti-Therm, a thermoelectric recirculating heater/chiller system, is suited for applications such as semiconductor and pharmaceutical, where temperature stability and reliability are critical.


Turbopumps

Available in pumping speeds that range from 10 to 700 liters/sec, HiPace has a rotor design that reduces runup time and provides high-gas throughput and compression for light gases. 


Two-Wire Temperature Transmitters

Designed for rail mounting, Sitrans TR200 and TR300 do not require additional power supply when connected in the 4 to 20 mA loop. 


VOC Detectors

MiniRAE 3000 and ppbRAE 3000 are used to measure where hydrocarbon-based chemicals pose a toxic threat. 


















BNP Media
© 2008 BNP Media. All rights reserved. | Privacy Policy