High Temperature Panels, Gaskets, WashersHigh strength materials are suitable for wall and panel insulation, or they can be fabricated into washers, gaskets, spacers or any other shape. With operational temperatures to 2,300 oF (1,260oC), these products provide thermal, mechanical and electrical insulation. Standard material is available in 4 x 8' sheets and up to 5" thick.
Red Seal Electric
Heat Transfer PumpsHMD/Kontro magnetic-drive pumps offer a range of sealless solutions for liquid transfer, especially in high temperature, toxic and noxious applications. ANSI-, ISO- and API-compliant, the pump has synchronous magnet or eddy current drive. Features include temperatures to 850oF (454oC), flows to 4,400 gal/min, heads to 660' and power to 470 hp.
Hot Oil Circulation PumpsMagnetic-driven NMWR pumps are designed for hot-oil applications to improve plant and personnel safety in industrial heating plants. Its containment shell replaces any mechanical seal and saves maintenance costs because most pump failures are caused by leaking seals. Maximum operating temperature without water cooling is 800oF (427oC).
Dickow Pump Co.
Process PumpsLine of pumps includes high temperature process units, air-cooled thermal liquid pumps, ANSI chemical and self-_priming process pumps, chemical-duty inline pumps, magnetic drive pumps, API-type pumps and vertical sump pumps. The company specializes in heat transfer pumps for liquids to 850oF (454oC).
Dean Pump Div.,
Pressure Reducer SystemPillarless construction and diameter-independent spring ranges are features of Predu. Additional features of the pressure reducer system include a screwed seat and a marginal seat, three exchangeable spring sizes, a balancing bellow and a sealing bellow, and easy change of spring and actuator.
Heat Exchanger Coating Fights CorrosionBaked phenolic coating protects finned tube coils from corrosive fumes and salt atmospheres. Licensed Saekaphen SI Series protects shell-and-tube heat exchangers. Tube bundles typically used in heat exchangers, condensers and evaporators can be protected against many acids, salts, water and alkaline services.
Heresite Protective Coatings Inc.
Hot Oil Heating SystemCompact electric heat transfer fluid (hot oil/thermal fluid) heating system provides indirect heating up to 650oF (343oC) and is designed to increase reliability, reduce degradation and optimize electrical power consumption during normal operation. With all-welded construction, the hot oil heating system includes the company's side-stream filter that continuously removes carbon soot, sludge and other debris. A thermal buffer is incorporated in the expansion tank, preventing and controlling oxidation of heated oil. Its UL-listed and -labeled control panel operates with solid-state SCR switching of heater.
Liquid Process Systems Inc.
Microprocessor-Operated Burner ControlEstro microprocessor-operated flame-controlling device is equipped with inputs and outputs for the ignition and control of industrial burners. Estro B is designed for pilot-ignited burners while Estro C is designed for direct-spark ignition burners. Either may be remote controlled. An EXP-1 card may be added to control burners equipped with an air damper, blower and pressure switch. The front panel includes a lockout/reset button, cycle display and flame-signal indicator.
Self-Cleaning Water FiltersFilters protect heat exchangers and prevent clogging of nozzles, tubes and other narrow passages by removing dirt particles down to micron size, of any specific gravity, from once-through and recirculating cooling water systems. Line-pressure-powered, the filter cleans itself without external power and does not interrupt system flow. Able to be installed in any position, filters are available from 10 to 10,000 gal/min.
Hot Oil Heating SystemSubcompact hot oil system has pre-engineered design package that has been field tested under rugged conditions at temperatures to 575oF (302oC). Low watt density Incoloy 800 sheath heating elements are arranged to provide even heat inside the tube bundle. Self-venting horizontal design of the heating chamber eliminates air contamination and the need to manually vent the heaters.
Gaumer Process Heaters, Systems and Controls
Round Blast TipsFabricated from heat-resistant alloy, round blast tips burn mixtures of air and natural, reformed-natural or bottled gas. The devices have a wide turndown range and permit adjustment of flame setting from a mild focus to hard blast. Long service life is offered even under severe operating conditions.
AGF Burner Inc.
Single-Screw CompressorsCool Compression line includes 12" and 16" models. Single-screw industrial refrigeration compressors have fewer components than twin-screw designs, which reduces overall maintenance. It uses direct contact heat transfer to cool the compressor oil right in the oil separator, eliminating the need for an oil cooler.
Vilter Manufacturing Corp.
Pressure BlowerSuited for high pressure applications such as combustion, forced air heating and cooling, fume and dust control, and light particle processing and conveying, pressure blower meets AMCA Type B spark-resistant construction guideline. Its corrosion-free housing and wheels are cast from 319 or 356 aluminum and high strength alloys. Line includes 38 models with radial bladed wheels and backward-curved blades in sizes from 8 to 18.5".
Chicago Blower Corp.
Burner ControlQuanta-Flame 5004-890 is a direct replacement for existing RA890 controls and does not require rewiring or changing of sensor. Flame-sensing burner control operates with existing UV sensors and flame rods. It has selectable trial for ignition times of 3, 4, 10 or 15 sec as well as selectable interrupted or intermittent pilot.
GN Electronics Inc.
Low Voltage AC DriveACS 800 drives are available in NEMA 1 or NEMA 12 enclosures without derating. Designed in a bookshelf style, units range from 6.5" wide low horsepower designs to freestanding 600 hp units that measure 13.78" wide. With integral EMC filters and chokes and rated at supply voltages of 230 to 690 V, the drive is backward compatible with the company's previous drive line.
ABB Inc., Automation Technologies, Drives and Machines
Mechanical Seal-, Pump-Tracking SoftwareSoftware enables manufacturers to collate data and generate eight reports that help identify the root causes of seal and pump failures. Each report provides a different operational perspective of the plant's mechanical seals and pumps. By comparing the information provided with the physical evidence on a failed seal or pump, a plant team can diagnose and correct process problems. The user can also examine the costs involved with new seals, labor, parts, inventory and downtime.
Impedance Pipe HeatingSystem is designed to heat stainless, carbon and alloy piping used for industrial applications such as those in the chemical, oil, food, water, liquid and gas industries. Features include temperatures to 1,400oF (760oC), low voltage, low watt density, flexibility, and accurate temperature control. Startup and field services are available.
Banner Engineering and Sales
Split-Coupled Vertical Inline Centrifugal PumpSeries 80-SC's vertical configuration allows it to fit in tight spaces to support industrial process needs. The pump assembly is quickly installed on an integrally cast support ring located on the bottom of the volute. Pump has an axially split high-tensile aluminum spacer coupling that permits seal maintenance without disturbing the pump, motor or piping connections. The mechanical seal can be removed between the gap in the pump and motor shaft when the coupler is removed.
Bell & Gossett
High Temperature InsulationHigh temperature insulation materials can be used as thermal breaks, gaskets, slip planes, dielectric barriers and chemical barriers. Materials are produced in rigid and flexible forms of sheets, rolls and tapes. Thickness ranges from 0.0005 to 3.00" and dielectric strength is greater than 500 V/m.
(603) 749 6896
Sensor Sheath Material for High TempsHexoloy sintered-alpha silicon carbide (SASiC) displays superior physical, mechanical and corrosion resistance when compared to tungsten carbide, nickel-based superalloys and 99 percent aluminum oxide. Offered as a standard sheath material for RTD and thermocouple assemblies, the material is particularly suited for high temperature applications.
Conax Buffalo Technologies
Metal Cleaning, Finishing SystemsCustomized systems range from simple tanks to complete turnkey cleaning and finishing systems designed around each project's requirements. In-house testing facilities provide exact results for new applications that are yet to be proven.
(414) 463-0500, ext. 16
Thermal Spike Valve TorpedoSuitable for use in plastics processing. thermal spike valve torpedo improves process cycle, reduces downtime and provides extended torpedo service life for more cost-effective molding. In addition to a thermocouple-controlled body heater that maintains resin melt temperature, the low voltage torpedo has an independent spike tip heater that provides a precision gate valve function. The valve action is accomplished by turning the spike tip element on and off in a timed sequence synchronized to the processing cycle mold-opening action. Mold opening initiates a time-delayed tip element activation, and during or immediately after injection, the tip heating element is de-activated.
Duratherm Processing Systems Inc.
Calibration FurnaceFur-1200 has been designed for the testing and calibration of thermocouples and RTD sensors. Standard calibrations can be performed between 572 and 2102oF (300 and 1,150oC). Its high purity ceramic liner diffuses the element energy, creating a more uniform temperature field and eliminating metallic contamination at high temperatures as with quartz-protected sensors.
Electronic Development Labs
Steam-Conditioning ValveModel TBX has a flow-up configuration to provide increased operating stability and ease of maintenance. It incorporates the company's low noise Whisper Trim technology within a simplified trim configuration that accommodates rapid changes in temperature. It also incorporates a manifold of variable geometry Type AF nozzles that produce a fine spray mist over a wide operating range. These nozzles are placed strategically based upon extensive computational fluid dynamics (CFD) analyses.
Emerson Process Management
Halogen Quartz Infrared LampsHalogen Quartz Infrared lamps emit short-wave energy and offer the advantage of instant heat. Medium-wave T3 Infrared lamps also are offered for applications when short-wave lamps are not desirable.
Philips Lighting Co., Special Lighting
Spring-Return ActuatorEngineered for quarter-turn automation of devices that require possible use during an electrical power failure, FQ Series is used for the opening or closing of any device that requires 90oof rotation during power outages. Possible uses include ball, plug and butterfly valves as well as dampers, vents and other rotating equipment.
Bernard Controls Inc.
Centrifugal PumpsModels 821/869 sealless magnetic-coupled centrifugal pumps are capable of operating with fluid temperatures as high as 350oF (176oC). Suitable for use in hot water systems or with hot oils for food products, the pumps are offered with flanges or threaded connections. Because the motors can be removed without draining the system, service is simplified.
March Manufacturing Inc.
Hot Isostatic Press Production UnitDesigned to uniformly apply pressure at elevated temperatures to all surfaces, hot isostatic press (HIP) production unit densifies parts to heal casting defects and voids, bond similar or dissimilar materials and form net or near-net shapes from metal, ceramic, cermet or graphite powders. It is built with inside dimensions of 1.969 to 59.06" (50 to 1,500 mm) and contains pressures from vacuum to 3,000 bar and temperatures as high as 4,000oF (2,204oC).
Engineered Pressure Systems