Stainless Steel Heat Exchanger

Welded end and primary seals on this stainless steel heat exchanger eliminate contamination. Unit has removable access panels to ease inspection and cleaning. Maximum operating temperature is 1,200 degrees F (649 degrees C).
Exothermics
(800) 662-3966
sales@exothermics.com
www.exothermics.com

Standard Shell-and-Tube

Offered in straight- or U-tube configurations, Basco Type 500 shell-and-tube heat exchangers have a fixed tubesheet. The highly standard design offers cost effectiveness while providing for options to meet specific customer requirements. Sizes range from 3 to 12" dia. and 14 to 120" length. Materials of construction are
carbon steel or 304 stainless steel for the shell and 0.5, 0.375 or 0.625" dia. tubes in copper, Admiralty, 90/10 copper/nickel, or 304 stainless steel.
API Heat Transfer
(877) 274-4328
sales@apiheattransfer.com
www.apiheattransfer.com

Hybrid Heat Exchanger

Hybrid combines the performance of plate-and-frame units with the high pressure and temperature capabilities of a shell-and-tube design. The stainless steel unit is suitable for applications in food, chemical, pharmaceutical and thermal storage industries.
Paul Mueller Co.
(800) 683-5537
heattrans@muel.com
www.muel.com

Protective Coating for Heat Exchangers

Saekaphen protective coating can be used to completely line the interior tube surfaces of shell-and-tube heat exchangers. Coating reduces fouling and protects the tubes from corrosion caused by most chemicals and all cooling waters. The lack of fouling and corrosion reduces maintenance and replacement costs.
Heresite Protective Coatings Inc.
(920) 684-6646
sales@heresite.com
www.heresite.com

Large Capacity, All-Welded Exchanger

Supermax is designed as an alternative to shell-and-tube units in elevated pressure and temperature applications. The all-welded plate heat exchanger is suited to applications with large flow imbalances, including gas or vapor condensers, economizers and related process and energy services, for pressures up to 70 barg (1,015 psig) and temperatures up to 1,000 degrees F (537 degrees C). With alternating channels for hot and cold media, the unit can be configured to provide true countercurrent or co-current flow. Nozzle sizes up to 12" (300 mm) can be accommodated on the shell side of the exchanger, offering high steam and liquid flow rates. Nozzles on the plate side can be up to 4" (100 mm).
Tranter PHE Inc.
(940) 723-7125
sales@tranterphe.com
www.tranterphe.com

Fluid Cooler Selection Software

Dryware program will quickly rate a standard or custom fluid cooler using coil algorithms. The program allows the user to customize a fluid cooler by varying rows, fins per inch, fin height, fin length, motor horsepower, fan diameter or fan layout. Software produces accurate submittal drawings complete with drawing number, editable notes and unit performance data. The model matrix has been expanded to include sizes with fin heights of 24 to 114", and finned lengths of 24 to 360".
Colmac Coil Manufacturing
(800) 845-6778
mail@colmaccoil.com
www.colmaccoil.com

Coils

Steam, liquid heating, cooling and refrigeration coils are custom designed for specific application requirements. Copper, stainless steel or carbon steel tubes are offered with aluminum, copper, stainless steel or carbon steel fins.
Outokumpu Heatcraft
(662) 229-2000
www.heatcraft.comm

Miniature Heat Exchanger

Available as tube-in-tube or shell-and-tube designs, miniature heat exchanger is constructed from 316L stainless steel. Sanitary models and custom designs are offered.
Exergy Inc.
(781) 294-8838
www.exergyinc.com

Coils

Coils are offered in designs with seven to 12 fins per inch with various fin heights. Tube diameters of 0.625 and 1" OD as well as heavy wall thicknesses are available. Varied tube centers meet replacement coil criteria. Possible applications include compressed gas, high-temperature steam coils, high-pressure vapor recovery coils and flue gas heat recovery as well as use as intercoolers, aftercoolers, oil coolers and jacket water coolers.
Super Radiator Coils
(800) 394-2645
www.srcoils.com

Brazed-Plate Heat Exchanger

Brazepak is designed for applications requiring high performance in a small size. The exchanger offers high thermal efficiency while withstanding high pressures and temperatures. A special brazing process is used to bond 316 stainless steel plates, which have a corrugated design for maximum turbulation and high heat transfer. The brazing process also eliminates the need for gasketed or rolled joints as well as pressure-retaining parts.
ITT Standard
(800) 447-7700
www.ittstandard.com

U-Bend, Straight Heat Exchangers

Shell-and-tube exchangers are offered in either U-bend or straight-tube designs. All are built to the ASME code and ASME stamped. Units also can be built to comply with TEMA standards. Exchangers have working pressures from 1 to 500 psi.
MultiTherm LLC
(800) 225-7440
www.multitherm.com

Liquid-to-Liquid Heat Exchangers

Counterflow design includes an enhanced heat exchange surface for efficient heat transfer. Standard copper connections are directly compatible with site piping, and the compact, rigid design installs quickly. For highly corrosive applications, the liquid-to-liquid heat exchanger can be specified in 90/10 copper/nickel or stainless steel. Offered in either single- or vented double-wall construction, the exchanger can be sized from 50,000 to 600,000 BTU.
Doucette Industries Inc.
(800) 445-7511
www.doucetteindustries.com

Thermoplastic Heat Exchangers

Thermoplastic heat exchangers are designed for heating or cooling applications, including heating of pickling acid solutions, electroplating, anodizing, removing heat from chemical dilution reactions, and acid-recovery systems. Calorplast line includes immersion, shell-and-tube, tube-plate, gas-liquid and flexible heat exchangers. Materials of construction include polyvinylidene (PVDF), polyethylene and polypropylene. The heating/cooling media can include saturated steam or hot water up to 35 psig at 281 degrees F (138 degrees C) and chilled water or water/glycol solutions.
George Fischer Inc.
(714) 731-8800
www.us.piping.georgefischer.com

Heat Exchangers with Static Elements

Equipped with streamlined static mixer elements, Kenics offers maximum transfer rates even with highly viscous, difficult-to-process materials. The static mixer technology helps ensure high heat transfer coefficients for fast, uniform heat transfer. Exchanger features include design pressures to 10,000 psi and construction from all metals and alloys.
Chemineer Inc.
(937) 454-3200
www.chemineer.com

Heat Exchanger Incinerates Fryer Exhaust Pollutants

KleenHeat connects to a fryer exhaust stack and incinerates odors, oil and other particulate that would normally pollute the air around your plant. Fryer exhaust is drawn into the heat exchanger's combustion chamber, where it is mixed with the hot products of combustion from the heat exchanger burner. After odors and pollutants are incinerated, combustion heat is routed through the exchanger's frying oil heat exchanger, where heat is transferred to the cooking oil instead of being vented to the atmosphere as waste heat. The serpentine tube bundles are constructed of all-welded stainless steel.
Heat and Control
(800) 227-5980
www.heatandcontrol.com

Continuous or Batch Heating, Cooking

Terlotherm vertical scraped-surface heat exchanger can handle process applications such as cooking, heating, cooling, slush freezing, crystallization, pasteurization and sterilization. Its vertical design allows a small footprint. Its hinged top cover allows for inspection and cleaning without disturbing the shaft seal, and the one-piece scraper blades can be replaced without tools.
Terlet
(856) 317-9960
www.terlotherm.com

Gasketed Plate Heat Exchangers

Viexplate line is offered in a wide size range and a number of plate and gasket materials. Designed and manufactured in accordance with ASME and other international codes, the exchangers handle design temperatures up to 350°F (175°C) and design pressures to 400 psig (28 barg). Maximum area is 15,000 ft2, and the practical approach temperature is 1 degrees F (0.6 degrees C).
Viex Process
(403) 254-3504
www.viex.com

Heat Exchanger for Sanitary Applications

Line of stainless steel equipment and components for ultra-pure applications includes shell-and-tube heat exchangers for sanitary applications, tanks, flow control components, custom modular process systems and advanced filter housings. All products meet the most stringent industry standards.
Allegheny Bradford Corp.
(800) 542-0650
www.alleghenybradford.com

Heat Exchanger for Bulk Solids

Bulkflow is designed to heat or cool bulk solids in a thermally efficient way. The compact, vertical design provides a large heat transfer surface to handle a range of flow and temperature requirements. The slow movement of the product minimizes abrasion and product degradation. The mass flow design ensures that the product is drawn down evenly and the temperature distribution is uniform.
Bulkflow Technologies Inc.
(403) 254-3515
www.bulkflow.com