March 5, 2009
Aremco-Seal 613 can be used to bond ceramics and seal porosity in ceramics and refractories used to 1,150°F (620°C) in electrical and high-vacuum applications where hermeticity is required. It is applied by dipping, brushing or spraying. The single-part, gray-pigmented, water-based glass coating cleans up prior to curing with warm water. Curing is accomplished by setting at room temperature for 30 to 60 min, then heating to 1,150°F (620°C) for an additional 30 min. The sealant is odorless and does not contain VOCs.
Aremco Products Inc., (845) 268-0039