A storage-stable, one-component, low-viscosity system, EP 19HT cures readily at elevated temperatures to a chemically resistant thermoset plastic. Its viscosity is 500 to 600 cps at 75°F (24°C). Recommended cure is one hour at 250°F (121°C). Shorter cures can be achieved at temperatures between 325 and 350°F (163 and 177°C). The product is a 100 percent reactive system and does not contain solvents or diluents. It has a service operating temperature range of -60 to 400°F (-51 to 204°C).

Master Bond Inc., (201) 343-8983