High Temperature Plate Heat ExchangerParamine system consists of a laser-welded plate channel and a gasketed channel. It enables the plate heat exchanger to operate at higher temperatures than traditional elastomeric gasketed plate heat exchangers. Traditional NBR and EPDM elastomeric gaskets are limited in temperature to between 240 and 330°F (115 and 165°C), depending on the material and curing process used. This exchanger is designed to handle fluids with operating temperatures as high as 410°F (210°C). It can be used in a range of applications, including gas sweetening.
APV, An SPX Brand • (800) 554-5290 • email@example.com • www.apv.com
Protective Coating for Heat ExchangersSaekaphen protective coating can be used to completely line the interior tube surfaces of shell-and-tube heat exchangers. Coating reduces fouling and protects the tubes from corrosion caused by most chemicals and all cooling waters. The lack of fouling and corrosion reduces maintenance and replacement costs.
Heresite Protective Coatings Inc. • (920) 684-6646 • firstname.lastname@example.org • www.heresite.com
Air-to-Air Heat ExchangerWith a custom-designed, air-to-air heat exchanger system, you can utilize up to 80 percent of the exhaust heat from any high temperature stack in process ovens, dryers or other plant heating applications. The company has experience supplying hundreds of cost-effective solutions for processors in search of greater energy efficiency. With unpredictable and rising fuel costs, striving for reduced energy usage drops savings directly to the bottom line.
Anguil Environmental Systems, (414) 365-6400, www.anguil.com
Plate Heat ExchangerAccu-Therm is designed to provide highly efficient heat transfer, whether you are processing simple fluids, viscous solutions or particulates. The plate heat exchanger design eases cleaning and maintenance and allows closer approach temperatures than other heat transfer technologies. It is offered in a range of plate sizes and configurations, with plates as large as 27 ft2(2.5 m 2). Several plate geometries are available for different heat transfer effects, including the company’s “free-flow” plate design, which is intended specifically for slurry processing.
Paul Mueller Co., (800) 683-5537, www.muel.com
Plate Heat Exchanger GasketsGaskets fitted to plate heat exchangers are offered in three material designations to satisfy challenging applications: 09-538/E8ZP4, 09-560/E9291 and 26-006/H8ZP1. They are intended for sealing heat exchangers in applications with extremes such as temperatures of -49 to 392°F (-45 to 200°C) and pressures up to 508 psi (35 bar).
Trelleborg Sealing Solutions Americas, (260) 748-5895, www.tss.trelleborg.com/us
Stainless Steel Heat ExchangersWelded end and primary seals on these stainless steel heat exchangers eliminate contamination. Removable access panels ease inspection and cleaning. High heat transfer effectiveness is produced by corrugating the heat transfer plates to achieve a sinusoidal wave pattern. The corrugated surface creates airflow turbulence as the air passes through the unit. Heat transfer is further enhanced by using a counterflow design. Plate sizes range from 12, 36, 42 and 48", with unit lengths of 50, 74 and 98". The design of the Series SP spaces the heat transfer plates 0.5" apart; the Series HP spaces the heat transfer plates 0.375". Maximum operating temperature is 1,200°F (649°C).
Exothermics, (419) 729-9726, www.exothermics.com
Tubular Exchanger for Heat RecoveryThermo-T recovers energy from processes with temperatures up to 2,000°F (1,083°C) and provides up to 80 percent effectiveness, according to the company. Built to handle high temperatures and corrosive environments, the tubular heat exchanger has welded construction to prevent cross-contamination. Integral thermal-expansion joints allow the heat-exchanging tubes to expand in high-temperature applications without causing excessive stress to the unit.
Munters, (800) 843-5360, www.munters.us
Designed for use in the refrigeration, gas compression, petrochemical, power generation and HVAC markets, dry coolers provide cooling of water, ethylene glycol/water, and propylene glycol/water mixtures in a variety of closed-loop applications. Closed-loop cooling eliminates the cost of makeup water and water treatment associated with the use of cooling towers. They are offered with ASME Sec. VIII, CE (PED), CRN, and UL508 safety and performance certifications.
Colmac Coil Manufacturing, (800) 845-6778, www.colmaccoil.com
Heat, Cool and Dehumidify
Series C can be used to replace shell-and-tube designs that have high pressure drop and, consequently, high operating costs. The pressure drop on the air/gas cooler shown is 0.1 percent; the model it replaced was 2.4 percent. The lower pressure drop will save 50 hp, which translates into energy savings of approximately $23,000 annually. Unit is stainless steel and has a washable, metal prefilter ahead of the cooling core and a removable mist eliminator downstream of the core. It will cool 5,000 cfm at 12 psi from 250 to 65°F (121 to 18°C) using 55°F (12.7°C) cooling water.
Xchanger, (952) 933-2559, www.xchanger.com
Heat Exchanger Coils
Line of heat exchangers for immersion heating applications includes coil designs such as U-shaped, serpentine, helical and multiple layer grid coils. Coils can be constructed with a range of materials such as fluoropolymers (Teflon), steel, stainless steel, titanium, Hastelloy C, zirconium, or other exotic materials, in designs from schedule 80 pipe to thin wall tubing.
Process Technology, (440) 974-1300, www.process-technology.com
Multi-Tube Bundle Graphite Heat Exchanger
Graphite exchangers utilize multiple bundles to improve heat transfer rates and simplify maintenance. Model RM allows the entire heat exchanger to operate in a countercurrent flow regime, thereby reducing the required surface area by up to 40 percent vs. traditional shell and tube technologies. Applications with close temperature approaches or even temperature crosses are easily handled. The bundle modules can be removed for cleaning or inspection by maintenance personnel. Graphite exchangers are used for heating and cooling corrosive chemicals such as hydrochloric, sulfuric and phosphoric acids.
SGL Carbon Technic LLC, (440) 572-3600, www.karbate.com
Heatcraft steam, liquid heating, cooling and refrigeration coils are custom designed for specific application requirements. Copper, stainless steel or carbon steel tubes are offered with aluminum, copper, stainless steel or carbon steel fins.
Luvata, (662) 229-2000, www.heatcraft.com
Compact Plate-and-Frame Exchanger
Plateflow is designed to provide close temperature control of fluids for heat recovery applications where space is a prime consideration. Efficient countercurrent flow yields heat transfer coefficients that are three to five times greater than other types of exchangers. Unit can be specified in 20 different models for heat transfer surface as high as 9,180 ft2. Plates are removable for service and maintenance.
ITT Standard, (800) 447-7700, www.ittstandard.com
Offered in straight- or U-tube configurations, Basco Type 500 shell-and-tube heat exchangers have a fixed tubesheet. The highly standard design offers cost effectiveness while providing for options to meet specific customer requirements. Sizes range from 3 to 12" dia. and 14"to 120" length. Shell materials of construction are carbon steel or 304 stainless steel. Tubes can be constructed in 0.5, 0.375 or 0.625" dia. sizes in copper, Admiralty, 90/10 copper/nickel, or 304 stainless steel.
API Heat Transfer, (877) 274-4328, www.apiheattransfer.com
Coils are offered in designs with seven to 12 fins per inch with various fin heights. Tube diameters of 0.625 and 1" OD as well as heavy wall thicknesses are available. Varied tube centers meet replacement coil criteria. Possible applications include compressed gas, high-temperature steam coils, high-pressure vapor recovery coils and flue gas heat recovery as well as use as intercoolers, aftercoolers, oil coolers and jacket water coolers.
Super Radiator Coils, (800) 394-2645, www.srcoils.com
Large Capacity, All-Welded Exchanger
Supermax is designed as an alternative to shell-and-tube units in elevated pressure and temperature applications. The all-welded plate heat exchanger is suited to applications with large flow imbalances, including gas or vapor condensers, economizers and related process and energy services, for pressures up to 70 barg (1,015 psig) and temperatures up to 1,000°F (538°C). With alternating channels for hot and cold media, the unit can be configured to provide true countercurrent or co-current flow. Nozzle sizes up to 12" (300 mm) can be accommodated on the shell side of the exchanger, offering high steam and liquid flow rates. Nozzles on the plate side can be up to 4" (100 mm).
Tranter, (940) 723-7125, www.tranterphe.com
Gasketed Plate Exchangers
Series NT is suitable for liquid-to-liquid applications in the chemical, power, sugar, renewable energy, food and HVAC industries. The OptiWave plate configuration provides even media flow over the entire width, making full use of the area, and increasing efficiency with fewer plates. Conventional plates allow most media to flow directly from one port to the other, reducing the flow on the far side. Sizes range from 2 to 30,000 ft2of total heat transfer surface. Connection sizes range from 2" to 20", and liquid volume flow ranges up to 20,000 gal/min.
GEA PHE Systems, (800) 774-0474, www.gea-phe.com
King brand flat-plate fin coils are intended for “air over fin” applications where heating, cooling or refrigeration is required. All coils employ heavy-duty materials and welded construction. Diverse product line allows industrial coils to be used in a range of industries. Hot water coils, due to the ability of the water to freeze, will generally be found in a reheat portion of a heating system. Normally this ensures that air below 35°F (1.6°C) will not come into contact with the reheat coil at a temperature between 45 and 75°C (7 to 24°C). Hot water coils are typically located in duct work where zone heating takes place.
RAE Coils, (918) 825-7222, www.rae-corp.com