The EP17HT-3 sets up in 20 to 30 sec and snap cures in only 2 to 3 min at 250 to 300°F (121 to 149°C). Mixing is not required because it is a one-part epoxy, and it can be cured in sections up to 0.25" thick. Working life is indefinite; it will not gel until heated above 200°F (93°C). The epoxy offers good electrical insulation and chemical resistance characteristics. It offers a Shore D hardness that exceeds 85 and a tensile lap shear of 2,100 psi.

Master Bond Inc., (201) 343-8983

Links