Turbo-Dryer is a proprietary continuous tray dryer design that consists of a stack of rotating circular trays in a sealed enclosure. The larger capacity model can be used to heat treat a fine (70 µm) metal oxide powder. This design is capable of operating at temperatures up to 1,200°F (650°C) to calcine or sinter metal powders. The unit includes an internal electrical heating system to provide the heat to remove the residual moisture. A small purge of dry air or nitrogen is used to purge water vapor from the system, keeping fines carryover to a minimum.
Wyssmont Co. Inc. • (201) 947-4600 • www.wyssmont.com