Batch Oven Cures Epoxy
Used for curing epoxy, No. 942 is a gas-fired, 350°F (177°C) walk-in batch oven. Workspace dimensions measure 84 x 144 x 108", and 400,000 BTU/hr are installed in a modulating natural gas burner to heat the unit. A 12,000-cfm heat input is driven to the process via two 5-hp recirculating blowers. Other features include 4" insulated walls; aluminized steel interior and exterior; three independent doors for workspace access on the front of the oven; standard double doors on the rear of the oven; 2" insulated floor with three pairs of built-in truck wheel guide track; and integral 6" I-beam supports to raise the oven above the factory floor level.