Designed to provide freeze protection and process temperature maintenance for high power, high exposure industrial heat-tracing applications, Raychem mineral-insulated heating units ensure operational reliability and corrosion resistance in harsh environments. 

Drying system includes an integral baghouse dust collector positioned directly above the fluid bed drying zone. The configuration is designed to contain all of the fine particles entrained in the airstream and allow them to remain in the dryer for processing as product rather than collecting them remotely or accepting their loss as waste. 

Two standard variations of ceramic insulation for box furnaces are rigid ceramic fiber boards and flexible blankets. They are manufactured using strands of refractory silicate compressed or woven into a lightweight textile, with excellent inherent strength and low thermal conductivity.

The Admag Total Insight is a lifecycle-aware magnetic flow meter that reduces OpEx and downtime by monitoring the health of the flow meter without removing it from the process.

Line of preengineered, skid-mounted boilers provide the system as prepiped and ready for startup. The company offers boiler skids for its full line of hot water boilers. 

With a firing range of 15,000 to 200,000 MBH, Model FDR(X) combines a windbox, air register, ignition assembly, fuel train, flame-safety control, combustion control, flue-gas recirculation system and forced-draft blower into a packaged unit. 

RotaBed fluidized bed scrubber is designed to handle gas capacities from 500 through 250,000 acfm. A swirl-induced Coriolis grid achieves good fluidized-bed stability, resulting in efficient gas mixing and transfer efficiency.

The walk-in oven has 4” thick insulated walls and an aluminized steel interior and exterior.  A four-port vacuum manifold, with pressure gauge and hand valve on each port, is included on the oven, as is a solenoid valve to bleed air into the manifold and a resin trap leading to the vacuum pump.

Kromschröder BCU 4 Series is a multi-functional, modular control solution designed for directly ignited or pilot/main burners of unlimited capacity in intermittent or continuous operation, and for modulated or step-controlled gas burners.

Blue M industrial ovens have temperature ranges of 27°F (15°C) above ambient to 662°F (350°C). They are designed with semi-perforated walls that allow for tuning of the oven airflow to maximize heating rates and uniformity.