Search for potential industrial heat transfer fluid suppliers for a variety of industries. Compare and contrast the types and styles of heat transfer fluids.
Are you sure you want to leave before submitting your RFP?
Company Profile
MultiTherm LLC, MultiTherm PSC
3223 Phoenixville Pike
Malvern,
PA
19355
United States
Phone: (610) 408-8361
Fax: (610) 408-8365
http://www.multitherm.com
MultiTherm heat transfer fluids/hot oils/thermal oils are used for temperature control of hot oil reactors, stills, wiped film evaporators, mixers, tanks, extruders, molds, platens, dies, laminating and calendar rolls, and dryers in over 35 industries throughout the world.
Additional Information
- Contact us about Reprocessed Fluid Specifics
Heat Transfer Fluid Data
- Bulk, Maximum Temperature, °F: 180
- Film, Maximum Temperature, °F: *Contact Manufacturer for Specifics
- Closed Cup Flashpoint (ASTM D93, °F) *Contact Manufacturer for Specifics
- Boiling point (vap press=14.7 psia) *Contact Manufacturer for Specifics
- Firepoint (ASTM D92, °F): *Contact Manufacturer for Specifics
- Autoignition (ASTM E 659-78, °F): *Contact Manufacturer for Specifics
- Pour Point (ASTM D97, °F): 50
- Cold startup temperature (viscosity = 300 cPs): *Contact Manufacturer for Specifics
- Minimum operating temperature ºF (viscocity = 20 cPs): *Contact Manufacturer for Specifics
- Density (lb/ft3 @ 400°F): *Contact Manufacturer for Specifics
- Density (lb/ft3 @ 600°F): *Contact Manufacturer for Specifics
- Viscosity (ASTM D445, cSt @ 400°F): 150-200 @ 40°C, cSt
- Viscosity (ASTM D445, cSt @ 600°F): *Contact Manufacturer for Specifics
- Thermal Conductivity (BTU/hr-ft-°F @ 400°F): *Contact Manufacturer for Specifics
- Thermal Conductivity (BTU/hr-ft-°F @ 600°F): *Contact Manufacturer for Specifics
- Specific Heat (BTU/lb-°F @ 400°F): *Contact Manufacturer for Specifics
- Specific Heat (BTU/lb-°F @ 600°F): *Contact Manufacturer for Specifics
- Vapor Pressure (psia @ 400°F): <0.01 psi @ 20°C
- Thermal Expansion (average % per 100°F): *Contact Manufacturer for Specifics
- Fluid Meets NSF Criteria for Food Contact: No
- EPA regulated: No