In every situation where a heat exchanger is required, the combination of products and service fluids, application, temperature and other variables will be different.

The RHD Series has a continuous scraping action to enhance the mixing of viscous products. Its sealing system allows for the removal of individual tubes for cleaning or maintenance while offering increased strength.

Because water has low viscosity at higher temperatures, it cannot cool itself as it runs through a system. The hotter water gets, the higher its pressure will get. It is, therefore, important to specify the right hot water circulation pump for your process. Click here to determine if your process requires a pump with a mechanical seal or if a sealless pump is a better option.

The SC Processor delivers heat transfer to transform slurries into powders or increase the viscosity of slurries in a single step. 

Lo-Density CLHR automatically provides precise temperature and viscosity control of heavy oils for efficient, steady delivery from the pump to the burner. 

Heat is an important part of many manufacturing and industrial processes. The right surface-heating solution can be used for freeze protection, flow/viscosity control, process temperature control, condensation prevention, container heating or composite repair.

When you have a need for process heating that requires heat transfer fluid at medium-high temperature — between the temperatures of 400 and 600°F (200 and 315°C) — different products may be used.