Selas Heat Technology, Streetsboro, Ohio, hired Jeff Malarikas vice president of sales and marketing for North America for all Selas brands, including Webster Combustion Technology LLC, a manufacturer of boiler burners based in Winfield, Kan. Also, Webster Combustion promoted Eric Graham from OEM sales manager to national sales manager. In his new position, Graham will continue to oversee sales to OEMs with added sales and marketing responsibilities to all sales channels. Graham will report to Malarik.
Omega Engineering, Stamford, Conn., opened a new office in Mexico. It is located in San Pedro Garza García (Monterrey metropolitan area), in the state of Nuevo León. To contact the office, visit mx.omega.com; email email@example.com; or call 01800 890 5495 (in Mexico) or +52 (81) 8335-5372 (outside of Mexico).
Also, Omega revised its New Horizons in Environmental Monitoring catalog. It contains more than 150 pages and has the products organized into six sections: temperature; heaters; flow, level, pH, conductivity and laboratory; pressure; data acquisition; and automation. Request it at www.omega.com.
Radco Industries, Batavia, Ill., a manufacturer of specialty fluids and lubricants, hired John Campbell as sales manager of its heat transfer fluids. Campbell is responsible for identifying and developing global accounts for Xceltherm line.
Air Monitor Corp., Santa Rosa, Calif., a manufacturer of thermal-mass and differential-pressure flowmeters, coal flow-measurement systems and instrumentation, joined the St. Louis-based Harbour Group family of companies.
Pittsburgh-based Heyl & Patterson published a new brochure for its barge unloaders line. Cargoes such as coal, corn, soybean, wheat, agricultural byproducts, wood chips and limestone can be unloaded with the systems. Request the literature at http://bit.ly/1EwFIlm.
A manufacturer of temperature control systems and equipment, Spaltech International, Halton Hills, Ontario Canada, hired Peter Sprouleas a technical sales representative.
Tulsa, Okla.-based BS&B will market flame arrestors and relief-vent products for the industrial market under its BS&B FlameSaf Ltd. brand. The company’s products will focus on protecting industrial plants and personnel from the dangers of explosion, flame propagation and overpressure.
Griffco Valve Inc., Amherst, N.Y., has earned certification for CE under the Pressure Equipment Directive (PED) 97/23/EC Category 4, Modules B and D for its design and manufacture of pressure relief/safety valves and backpressure valves.
The International Society of Automation released the fifth edition of its Measurement and Control Basics.The ISA manual was updated to reflect the latest automation technologies and incorporate self-study exercises and challenge-solution examples. To order, visit http://bit.ly/1EwFavJ.
Metalfab Inc., Vernon, N.J., a manufacturer of dry solids-processing equipment, issued a catalog of the company’s products for chemical processing, power generation, food, pet food, water treatment, pulp-and-paper, oil-and-gas and plastics industries. The line includes pre-steamer bin activators, continuous mixer/blenders, and flexible screw and vibratory tube conveyors.
Thermacore Inc. received full recertification to AS9100:2009 Rev. C and ISO 9001:2008 quality standards at its Lancaster, Pa., headquarters and manufacturing facility through the independent Lloyd’s Register Quality Assurance registrar. Thermacore has been recertified to these two quality standards for the design, manufacture and distribution of thermal management components and systems.
Test and measurement, process and temperature instruments intended to help maximize productivity are the focus of the V80 Sourcebook from Davis Instruments, Vernon Hills, Ill. To request a free copy of the catalog, visit www.davis.com or call 800-358-5525.
Cincinnati-based CECO Environmental Corp. received approximately 20 new orders totaling $33 million from customers in North America, the Middle East and Asia. Orders span a number of sectors, including large industrial, utilities, natural-gas and traditional power generation, refineries and petrochemicals. CECO Environmental provides fluid handling, filtration, product recovery and air pollution control equipment.
Reading Bakery Systems, Robesonia, Pa., a manufacturer of baking and process systems, promoted to Jim Warren to vice president of Exact Mixing, a Reading Bakery Systems brand.
Hydraulic Institute, Parsippany, N.J., named Aleks Roudnev, manager of research and design, applied hydraulics, Weir Minerals North America, as its 2014 “Member of the Year.” The award was conferred to Roudnev at the Hydraulic Institute’s 2015 annual meeting held in St. Petersburg, Fla. HI honored Roudnev for his commitment to the organization in both leading and participating in numerous HI committees in the advancement of the institute’s technical work as well as in guiding young engineers within the institute’s extensive technical organization.
In the United Kingdom, pipe specialist Flexenergy appointed Ian Urmston as sales and business development manager for the south, which encompasses Wales, the Midlands, East Anglia and all of the southern counties of England, in addition to London. Urmston has worked in the construction and energy sectors for more than 25 years and will be responsible for introducing customers to Flexenergy’s energy efficient pre-insulated products, including from cooling pipes.
Pasternack Enterprises Inc., Irvine, Calif., hired Tim Galla as the company’s product manager for active radio frequency (RF) components.